SPRAY INSTALLATION FOR XYLENE-BASED ADHESIVE. AUTOMOTION SECTOR
These parts were being sprayed manually, with a very high cycle time. The aggressive environment was harmful for the operator.
Installation characteristics:
- Automatic feed to machine.
- Atex adhesive dispenser.
- Gas extraction to avoid exceeding concentration (LEL).
- 3 Spray guns (2 upper and 1 lower).
- Microvolumetric dispenser.
- Atex high accuracy flow meter.
- Heating by means of contact cartridge resistors.
- Instant temperature measurement.
- Automatic extraction from machine to OK/NOK parts.
- Multi-reference installation.